iMeshbean Small Grid TIE Power Inverter Converter Solar Panel Stackable USA Seller
More Models are available
Wind-250G: B008BDAQDY
Sun-300G: B005N2WHDI, Wind-300G (10.8V ~ 30VAC): B007WQBK2C,Wind-300G (10.8V ~ 30VDC): B005N2OLZU
Sun-500G: B008CNM1SQ, Sun-S500G-HI: B005N29SGM
Wind-500G (10.8V ~ 30VAC): B007WQDKMA, Wind-500G-HI (22V ~ 60VAC): B007X0L2C0
Wind-500G (10.8V ~ 30VDC): B005N2ST9E, Wind-500G (22V ~ 60VDC): B007X0OVGO
Sun-600G: B007XAEINU, Sun-600G -HI (10.8V ~ 30VDC): B005N2VLO4
Sun-1000G-HI(22V ~ 60VDC): B007XAPDLQ
Specification:
Normal AC Output Power: 200W
Maximum AC Output Power: 250W
AC Output Voltage Range: Switch is at 230V Position: 190V ~ 260V
Switch is at 115V Position: 90V ~ 130V
AC Output Frequency Range: 46Hz~65Hz
Total Harmonic Distortion (THD): <5%Power Factor: 0.99
DC Input Voltage Range: 10.8V ~ 30V
Peak Inverter Efficiency: 92%
Standby Power consumption: <0.5WOutput Current Waveform: Pure Sine-wave
Dimension:220mm*170mm*60mm
Introduction:
The only plug and play small grid tie photovoltaic system;the stackable small grid tie photovoltaic system
Installation:
The individual system of SGPV is shown in Figure 2
Installing the solar panel of the SGPV at a suitable location that sunshine can irradiate on it.
Connecting the cables of the solar panel to the DC input terminals of the small grid tie inverter of the SGPV,inserting the plug of the inverter into the socket of the home grid.
After this,when the sun shines, the SGPV will convert the solar energy to the home grid.
Package :
Power inverter,User Manual and Power cord