iGuerburn 18-Inch SATA 3.0 (SATA III) 6.0 Gbps Cable with Locking Latch - 2 Pack : 1 x 90-Degree Plug(Right Angle Connector) +1 x 180-Degree Plug; 1 x 180-Degree Plug + 1 x 180-Degree Plug
Features
-The SATA III cable connects a Serial ATA drive to motherboard and provides data transfer speed at up to 6 Gbps.
-Nice quality and it never hurts to have a few for backup. The 90 degree end is a necessity in many case scenarios, depending on your situation.
-Just what You needed to add a second SATA drive to Your Computer,NAS mini-ITX case,Mobo and Sata SSD etc. You needed the right angle connector because there is no room for a straight connector
-One end of this internal cable features a straight connector, while the other end uses a 90-degree connector, which can make for better cable management in some situations, especially in tight spaces. Each end has an attached locking latch, to ensure that your connections do not come loose due to movement or vibration. We also pack another straight connector for your convenience
-While the cables for all three revisions appear to be similar and will physically fit into the connectors on all SATA drives and controllers, the higher data transfer rate of SATA 6 Gbps requires higher quality materials and closer tolerances than the previous two revisions required.
-Higher quality materials and closer tolerances than the previous two revisions required.
-Note that SATA 6 Gbps cables are backwards compatible and can be used with SATA 3 Gbps and SATA 1.5 Gbps devices. However, the data transfer of the SATA subsystem will be limited to that of the slowest device. So, for example, if a SATA 6 Gbps cable is connected to a SATA 3 Gbps drive and a SATA 1.5 Gbps controller, the drive will be limited to a transfer rate of 1.5 Gbps.
Specifications
-Type 1: 7-pin SATA Male and 7-pin SATA Male
-Type 2: 7-pin SATA Male and 7-pin SATA Male (90 Degree)
Package Contents
-Cable 1: 1 x 90-Degree Plug(Right Angle Connector) + 1 x 180-Degree Plug
-Cable 2: 1 x 180-Degree Plug + 1 x 180-Degree Plug