ezOutlet - Internet Enabled IP Remote Power Switch with Reboot (AC Power/Single Outlet/iOS/Android/Web Interface)
ezOutlet monitors an Internet connection and automatically power-cycles the device plugged in to it if the network goes down. You can also remotely turn On / Off / Reset multiple ezOutlets via a free Android / iOS APP or the ezOutlet's internal password-enabled web interface.
There is no messing around with port forwarding or domain names. Just connect ezOutlet to the Internet, install the APP on your phone/tablet, sync and use.
ezOutlet can:
€ Keep-alive a network device
€ Remote power on-off-reset a device on demand
€ Schedule a power on-off-reset at specific times
Usage:
1) Connect LAN cable to ezOutlet
2) Connect power cable to ezOutlet. Solid yellow LED indicates unit is online.
3) Install the APP on an Android/iOS device
4) Add your ezOutlet to the APP:
   a. click "Add Device" in the APP
   b. Press the 'Function Button' on the ezOutlet
   c. Enter the ADD code (printed on ezOutlet label)
5) Done
Function Button
€ Press once: Invoke 'ADD' mode. LED will blink in sequence Green, Red, Yellow. Blink will stop when the unit has been successfully 'Added' to the APP or after 3 minutes.
€ Button pressed while connecting power: Invoke firmware upgrade mode. (Green off, two other LEDs blink)
€ Press >10 seconds: Reset to factory default
Specifications
€ Input: 125~250V, 50/60Hz Output: 10A
€ Network: 10/100 Base-T, RJ45
€ Operating: 0~60C at 10~90% RH
€ Dimensions: 95x85x55 mm
€ Includes: ezOutlet, AC power cord, Ethernet cable
Proxicast is Mega System Technologies' Authorized ezOutlet Reseller on Amazon.