aFe Power Scorcher (Sensor B) BMW N55 Engine (E9X 335i, E82/88 135i, F07/10 535i, E70 X5 35i, E71 X6 35i)

If you are the BMW owner looking for power gains but not looking for problems related to tuning your N54/N55 engine then this aFe Scorcher Module is the perfect tune for you! aFe programmers and engineers spends thousands of hours to create this tuner so there would be no problems that other more radical tuners give you. This module is programmed from aFe to give you the perfect amount of extra boost that will not harm your N54/N55 engine, however will adapt and add more when other modifications are added just as downpipes, exhaust and/or intake. Put up to 40hp and 51lbs. x ft. torque to your N54/N55 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module. Sensor B Style: The BMW N55 came with two types of TMAP/MAP Sensors. This Module accommodates the Sensor 2 style. The Sensor 2 TMAP/MAP sensor is identified by having a gray connector clip and no raised square located between the mounting bolt locations. See the illustration on this web page or on page 3 of the instruction manual for details. The TMAP sensor is located on the drivers side of the engine, mounted on the intake tube between the factory air box and the strut tower. Note: This information is critical to choosing the correct module for your vehicle.