Zircon MetalliScanner MT6 Professional Metal Detector

Find buried metal before your drill bit does. Differentiate between ferrous metal (such as rebar) and non-ferrous metal (such as copper pipes). Map out pipes, electrical conduit, metal studs, and more.

Watch the MT 6 in action. See how an MT 6 is used.

Locate embedded metal before your drill bit or saw blade does. MetalliScanner MT 6 is the tool you need if you are sawing concrete slabs or walls that contain rebar, conduit, or plumbing. This powerful dedicated metal scanning tool can locate metal up to 6 inches (152 mm) deep in solid concrete.

MetalliScanner MT 6 locates both ferrous and non-ferrous metal up to 6 inches deep in concrete and other non-metallic surfaces. It also differentiates between ferrous and non-ferrous metal targets and indicates the target depth in inches and centimeters. Use MetalliScanner MT 6 to find or avoid rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more.

• Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe)
• Shows the depth of metal from the surface in both inches and centimeters
• Easy-to-read LCD screen pinpoints the location of metal objects, such as rebar, to the nearest inch and depth to the nearest 1/2 inch (13 mm)
• Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble

Use the MT 6 to Scan for Rebar and Other Metal Objects Like Pipes, Metal Studs, and More
	The MT 6 is recommended in the protocols for the official My Safe Florida Home program. They recommend using the MT 6 for measuring subsurface nail spacing and locating rebar in masonry.