Yaho-mall the Clapper Sound Activated Switch on / Off By Hand Clap Electronic Gadget

1. Set Sensitivity Dial to HOME
2. Plug appliance into left receptacle of the clapper(below the "II") -- the maximun
wattage per outlet is 250W. If you are using both the 2 clap and 3 clap receptacles,
the combined total wattage can not exceed 400W.
3. Plug clapper into the wall socket.
4. Manually turn appliance on -- the indicator light to the left of the "II" will glow when
the appliance has been manually turned on, but is clapped off.
5. You can now turn on or off by clapping. You don't have to clap very hard. The clapping
sequence is more important than how loudly you clap -- when each pause is approximately
1/2 to 1 second long, the three pauses after the second clap are very important since the
clapper must determine that you are not going to clap a third time. If you clap a third time,
the appliance connected to the two clap receptacle would not activate.
How to operate an appliance with 3 claps:
1. Set Sensitivity Dial to HOME
2. Plug appliance into right receptacle of the clapper(below the "III") -- the maximum
wattage per outlet is 250W. If you are using both the 2 clap and 3 clap receptacles,
the combined total wattage can not exceed 400W.
3. Plug clapper into the wall socket.
4. Manually turn applicance on -- the indicator light to the right of the "III" will glow when the appliance has been manually turned on, but is clapped off.
5. You can now turn on or off by clapping. You don't have to clap very hard. The clapping
sequence is more important than how loudly you clap -- when each pause is approximately
1/2 to 1 second long, the last pause after the thid clap is very important since the clapper
must determine that you are not going to clap a fourth time.