Xtreme Production CNC Machined 350 QX / 350 QX2 Aluminum Prop Adapter Set

Our Xtreme Production Blade 350 QX / 350 QX2 Propeller Adapter sets are CNC machined from billet aluminum. These adapters are designed to work with the Xtreme Production carbon fiber propellers used on the stock E-Flite Blade 350 QX / 350 QX2 motors (BLH7802). They are an aluminum replacement for the stock plastic adapters that come with the Xtreme Production props.

These aluminum adapters align the prop very nicely over the motor shaft ensuring a smooth and vibration free flight. They eliminate any concern of breaking or cracking while tightening down and do not wear out over time like the plastic ones.

Running a set of these adapters with your Xtreme Production Carbon Fiber props adds a nice touch to your 350 QX / QX2 and will give you the confidence needed for worry free flying.

Installation is quick and simple. No modifications necessary.

Two step installation:

1. Install aluminum adapter onto prop making sure it is fully seated
   
2. Install prop / adapter assembly onto motor securing with 2 supplied screws
   (a small drop of blue loctite can be applied to threads of each screw before installing)

Included: 4 - Xtreme Production Aluminum Prop Adapters, 8 - M2.5 x 6mm socket cap screws

Weight (single prop adapter): 2.5g

Notes:

- These adapters are designed to be used with the Xtreme Production 350QX Carbon Fiber propeller set.
- Adapter screws should be checked and tightened as necessary. A drop of blue (removable) loctite can be applied to the screws before installing.
- Carbon fiber propellers not included.