Xiangtat Hobbywing Ezrun PRO Competition Rc Brushless Motor 150a ESC Speed Controller for 1/5, 1/8 On-road and Off-road Cars

Specification
Model: EZRUN-150A PRO
Dimension: 68mm(L) x 55mm(W) x 45mm(H)
Cont. / Burst Current: 150A / 1080A
Resistance: 0.0002 ohm
Suitable Car: 1/5, 1/8 on-road and off-road cars / trucks for competitive race
Suitable Motor: =>3.5T
Battery: 6-18 cells (NiMH or NiCd) or 2-6 cells (Li-Po)
BEC Output: 5.75V/3A of Switch mode built-in BEC
Net Weght: 150g (without wires)

Features
Compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LRP and Feigao Etc.
Excellent start-up, acceleration and linearity features.
3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately).
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called "Punch") from "very soft (Level 1)" to "very aggressive (Level 9)".
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
8 steps of timing adjustment by software. You can even use this programmable item to adjust the timing value even for a sensored brushless motor. (Traditionally, you must turn the rear cover of the motor to change the timing value for a sensored brushless motor).
Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
Firmware can be updated through an USB adapter (Optional equipment).
Splash proof and dustproof.