XT-XINTE FY-G3 Ultra 3-Axis Handheld Brushless Steady Camera Gimbal with 1 Piece Carbon Fiber Extention Tube&Switch End Cap


The G3 Ultra 3-Axis Steadycam handheld gimbal allows you to use your GoPro to shoot smooth video easily and share your life with your relatives and friends. The 3 axis gimbal stabilizes pitch, roll, and yaw giving you a super stable shot. This will quickly become one of your must-have travel items.
Features: Lightweight, easy to carry, simple to use, power-and-go Electronic slow to follow mode on both Yaw and Pitch axis. Equipped with four batteries and one battery charger. Each battery type is 16340, and the capacity is 1800mAh. You just need to use three batteries and one can be used as backup. Over 2 hours of use time Compatible with GoPro Hero 3.
Status indicators: Blue light flash 3 times: full battery. Blue light flash 2 times: standard battery. Blue light flash 1 time: low battery.
Attention: 1.Power up after install the GOPRO3 to the Gimbal. The skills of adjusting pitch : double click the button first to be in heading and pitch following me mode. Adjust the attitude to move the pitch to the angle you want , then press the button once to lock the angle of pitch being in the heading following me mode . Autodyne mode: trun 180 degree of the gimbal,(the USB port facing you). adjust the angle of pitching through the method above, then you can Autodyne easily. Initialize the FY-G3 Ultra Gimbal (FY-G3 Ultra Gimbal needs to be initialized when the following situation appears ): 1. After power on, the angle of pitch has a little angle difference with the horizon line 2. After power on, the angle of roll has a little angle difference with the horizon line 3. When the heading is in the till condition, the angle of heading amends frequently in a small angle . The method of Initializing the FY-G3 Ultra Gimbal: Keep the gimbal in the still condition, then power on , it will initialize automatically.after that the gimbal can work normally.