Water Refill Genie ATO KIT

e-Fins Water Refill GenieATO Kit (AQUARIUM NEW BEST ATO!) Features: 1) Works for any aquarium setup: Reservoir based pump / Gravity fed or direct RO filter fed setup. 2) Water level in reservoir can be higher than sump without causing siphoning issues like others. 3) Magnetically coupled NEW Water Level Sensor with no moving parts that is much more accurate, durable and dependable than float switch, optical, air pressure differential, temperature, E-field and digital based sensors! Sensor is made by special process; never corrodes & lasts for years to maintain water level within 0.1". Sensor operation not affected by waves, bubbles, algae, debris, lighting, snails and others 4) User friendly Computer Unit offers 8 working modes to fit any need. w/ PAUSE for tank maintenance. 5) Fail safe features: stop & alarm you when reservoir low, pump or solenoid valve fail, tank leaks. Here Are The Parts Included In The Kit: 1) Pump - 12V DC, 76 GPH (Gallons Per Hour) 6-feet headroom 2) Solenoid Valve - 12V DC, 100 PSI, fits standard "D hard tubing 3) Water Level Sensor - 0.1" accuracy (dimension 1.5" L x 1.5" H x 0.5" W) 4) Magnet block - Holds Water Level Sensor in place onto tank glass of up to 0.6" thick 5) e- Fins Genie Computer Control Unit - With knob to select 1 of 8 OP modes and 2 LEDs 6) Universal UL approved AC / DC power supply (100 ~ 240V AC to 12V DC) 7) 6 feet long 3/8" Diameter flexible hose - For pump outlet to sump 8) 4-feet long " Diameter hard tubing - For Solenoid Valve to sump or RO/DI machine 9) 3 hose clamps - For securing hose at Solenoid Valve or hose outlet to sump or tank 10) Plastic plate to mount the solenoid valve 11) 200 micron filter bag - Housing pump to prevent debris from reservoir entering tank 12) Y cable - For fanning out PUMP output from Computer Unit to Pump & Solenoid Valve 13) 6 screws -For securing & mounting the Solenoid valve and the computer Control Unit