ViewTool Ginkgo USB to SPI Adapter Support Windows/linux/Mac/Android/Raspberry Pi, USB-SPI Compatible with CAN/I2C/UART/ADC/DAC/GPIO

The windows driver of Ginkgo series product has passed microsoft driver signature certificate, it's not necessary to use "Disable driver signature enforcement" in all windows system.
Typical Applications:
- SPI device or chip control and debugging.
- Sensor with SPI interface testing.
- SPI Flash or EEPROM data reading and writing.
- SD card reader via control MFRC522.
- USB to dual serial port/TTL.
- Analog voltage measurement and GPIO input or output control.

Feature:
- Support Linux, MAC OS, Windows.
- Support Android, Raspberry Pi.
- USB bus power supply; 5V and 3.3V output; max current 500mA; short circuit protection.
- Support SPI Host/Master mode and Slave mode.
- 5 channels CS output up to 36MHz.
- There is much kinds of free PC software.
- Support USB-SDI12, USB-EasyScale, USB-UART, PWM, ADC/DAC, GPIO and others.
- Multiple USB-SPI adapter can work in one PC at the same time (up to 100).
- The firmware can free update or change (such as CAN/I2C) by Own Bootloader program.
- Provide secondary development API and API detailed document and all kinds of languages platform application examples.

Performance:
- USB 2.0;bus-powered.
- Standard SPI mode up to 36Mbps; data transmission speed up to 800KByte/s with PC.
- 8 channels ADC (12bit) analog voltage.
- 16 channels GPIO outgoing control.
- 4 channels Pulse counter input.
- 2 channels UART can output RS485 signal (DE); max baud rate up to 2.25Mbps.
- 8 channels PWM signal output; frequency range: 1Hz to 20MHz.
- 16 channels EasyScale bus signal output.
- 2 channels SDI12 bus output.
- Safe voltage: 0~5V
- Size: 103mm×53mm×28mm; Weight: ≈200g
- Temperature range: -40℃～85℃
More info and customer support please look at website.