Vibra-TITE 125 Removable Medium Strength Gel Anaerobic Threadlocker, 6 ml Tube, Blue

Vibra-TITE 125 gel Threadlocker is an anaerobic thread locking adhesive for all types of metal, threaded fasteners. Cured performance shows controlled medium strength with good temperature and solvent resistance against water and non-polar solvents. This product cures rapidly on plated, oily metal surfaces or inactive surfaces. Replaces lock washers and plastic inserts. Locks machine tool access bolts, studs, and hydraulic system bolts. Used on gear box bolts/drive shaft, bearing cover cap screws, counter sunk screws, conveyor roller bolts and construction equipment. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the tube onto threaded parts. Fixture speed without primer is 10-30 min with full cure in 24 hours. 3/8 phos-oil 120 lbs./inches typical Breakaway strength. 3/8 phos-oil 45 lbs./inches typical prevailing strength. Shelf life is 24 months from date of manufacture when stored at 25 +/- 2.7 degree C (77 +/- 5 Degrees Fahrenheit). Seals nuts and bolts ranging from 1/4'' to 3/4'' (6-20mm) in diameter while allowing disassembly using standard tools. 0.015 inches maximum gap fill. 8 ml tube.