The Vestil PEL-88-A DC-powered quick lift has an aluminum frame, a handle, four polymer caster wheels, and a battery-powered hydraulic platform and is suitable for lifting and transporting heavy materials in narrow aisles or confined spaces. The lift is made of aluminum for light weight and resistance to corrosion and tarnishing. The platform is made of HDPE (high-density polyethylene) for chemical and moisture resistance. The lift has an electric motor and push buttons to raise and lower the platform to an optimal height for loading or unloading. The 24V battery powers the motor and is recharged by an on-board battery charger. The caster wheels measure 3" in diameter and swivel for maneuverability. Two of the caster wheels have brakes to keep the lift from rolling. The handle enables the lift to be controlled and maneuvered. The lift's platform measures23-1/2x 18-1/2 inches (W x L). (W is width, the horizontal distance from left to right; L is length, the horizontal distance from front to back.) The lift has a load capacity of 175 lb. and a service range of 5-1/2 to 57 inches and weighs 115 lb.

Lift tables typically comprise a frame, a scissors mechanism, and a hydraulic or motorized platform that can be raised or lowered to an optimal, ergonomic height to load or unload heavy materials, or to support a person. Some lift tables have wheels and a handle, allowing them to be used as carts for transporting materials. The platform may be controlled with a foot pump or, in the case of electric-powered lift tables, push buttons. Lift tables can be used in warehouses and other industrial environments.

Vestil manufactures materials handling equipment, including hoists and trolleys, jib and gantry cranes, loading dock equipment, and storage solutions. The company, founded in 1968, is headquartered in Angola, IN.