U.S. Solid 1/4" Stainless Steel Electric Solenoid Valve 12VDC Normally Closed VITON

U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a stainless steel body, one-quarter inch (1/4") female threaded (NPT) connections, and heat and oil resistant Viton gasket.

Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel.

Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.

Brand: U.S. Solid

Model: USS2-00065

Size: 1/4"

Flow Aperture: 2.5 mm

Body Material: Stainless steel

Gasket / Diaphragm / Seal: VITON

Rated voltage: DC 12 V, ± 10%

Current: 1.167 A

Power rating: 14 W

Operation Type: Direct Lift Valve

Operation Mode: Normally Closed

Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)

Flow capacity: 0.23 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI

Flow value: 0.23 Cv

Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)

Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)

Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.

Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.

Quality assurance: CE Certified