Turnigy Nano-tech 2200mah 3S 35~70C Lipo Pack

Suited to the following models:ALIGN T-REX450, E-flite Blade 450 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE, Caliber 450V, CALIBER 400, RAVE 450, GAUI 330S

Spec.
Capacity: 2200mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 35C Constant / 70C Burst
Weight: 199g (including wire, plug & case)
Dimensions: 115x35x27mm
Balance Plug: JST-XH
Discharge Plug: XT60

Advantages over traditional Lipoly batteries
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn't exceed 60degC
• Swelling during heavy load doesn't exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.