TreasLin 300m HDMI Coaxial Extender Over 75ohm Coaxial Cable Rg59 Rg6 Rg7 Rg8 BNC up to 900 FT Lessloss No Delay for TV Projector DVD STB

INTRODUCTION
HDMI Over Ethernet is based on TCP/IP standard, so you can use IP switch box. It transmits your HD display with the high resolutions up to 395 feet (120 meters) away from your HDMI or DVI-D source by using one CAT5e/6 cable. With the advantage of TCP/IP standard you can extend your HD video to multiple displays by using an Ethernet Switch.
PACKAGE CONTENTS
1) Main unit No. 1 Sender
2) Main unit No. 2 Receiver
3) Two pieces of 5V DC Power Supply
4) A piece of IR transmitter and a piece of IR receiver
5) User's Manual
SPECIFICATIONS
HDTV Resolutions: 480p,576p,720p,1080p
Audio: Sample rate: 32kHz, 44.1kHz and 48kHz
IR remote control: 38KHz; NEC
HDMI: HDMI 1.3
HDCP: HDCP 1.2
Power adapter: Input: 100V - 240V (50 - 60Hz)
Power consumption: HDMI Sender: 3W HDMI Receiver: 3W
Operating Temperature/Humidity: 0- 70 degrees/10% - 80%RH(no condensation)
Storage Temperature/Humidity: -10 - 80 degrees/ 5% -90% RH(no condensation)
CONNECTION AND OPERATION
Easy To Use Easily
1) Connect the HDMI source (such as DVD, PS3, STB ) to the HDMI IN of Sender.
2) Connect the IR sender to the Sender IR OUT Port, and be Directed at HDMI video source's IR receiver.
3) Connect the HDMI out of Receiver to HDTV display.
4) Connect the IR receiver to the Receiver IR IN Port.
5) Use one Cat5e/6 cable up to 120m to connect the Sender and Receiver.
6) Plug two pieces of 5V power supply into the Sender and Receiver.
7) Power on the HDTV display and HDMI source.
WARRANTY
-1 year warranty
-After you receive our products, if you feel satisfied with us, please give us an encouragement, if not, please contact us and we will serve you until you are satisfied