Touch Screen Digitizer Replacement for Asus Fonepad 7 2014 Fe Me170cx 170cg Me170c Me170 K012

Before Installation Notes
1. Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
2. Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible if the mobile phone is damaged during installation.
3. Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.
4.When you start to assemble it, DO NOT peel off the film and DO NOT paste the screen before you have finished testing the screen. We do not accept refund or replacement for a screen with ruffled film or pasted screen.
5.If you are not able to assemble it yourself, please hand it to an experienced mobile phone repairman to assemble it for you.
6.You are considered to have fully agreed on the above clauses if you have ordered it. If you do not, please do not order it.