Tontec 7 Inches Raspberry Pi LCD Touch Screen Display TFT Monitor AT070TN90 with Touchscreen Kit HDMI VGA Input Driver Board

Driver board interfaces:
1.Power Supply(5~12V 2A) 2.HDMI 3.VGA Connector 4.AVI 5.AV1+AV2 6.Keyboard 7.TTL Signal 50Pin 8.LVDS Signal 1/2 ch 6bit 8bit 9.12V Backlight 10.Inverter Connector

Note:
This controller board support Automatically Switch to AV2(Reversing View camera). Please connected ACC to 12V.

The five buttons are as follows: S1 = Power, S2=Menu/Select, S3=Up, S4=Down, S5=Video Source Select

Package content:
1* HDMI+VGA+2AV Controller Board VS-TY2662-V1 (Support Automatically switch to AV2)
1* 7inch 800*480 Lcd Panel AT070TN90
1* 5-button switch and adjustment panel
1* 7 inch Touch Screen Kit
NOTE1:If you don't know how to connect the Screen,please feel free to contact us
NOTE2:Power Supply is NOT included.
If you want to conect this screen to your Raspberry Pi,you need a AV Cable or a HDMI Cable,or if you have a HDMI TO VGA CABLE For Raspberry pi,you can use a VGA Cable to connect your Raspberry pi to this Screen.
NOTE3:There is a sticker on the LCD screen. Please peel off before use.

User Manual:https://s3.amazonaws.com/ttbox/7lcdtouch.zip

Touch Panel Linux Driver:https://s3.amazonaws.com/ttbox/7Touchlinuxnewest.rar

Installation Method
http://youtu.be/E_YjNSn3sz0