Toggler Snaptoggle Wall Anchor with BB 1/4"-20" - 4 PK Heavy Duty Deep Wing

Toggler Snaptoggle Hallow Wall Anchor BB 1/4"-2.5" Bolts - 4 PK These are great for installing just about anything to your wall! Installers use these to mount TV brackets to walls, floating shelves, heavy wall fixtures, etc. The possibilities are endless! Features: - Snaptoggle anchors BB with 1/4" x 2.5" bolts are rated to hold 265lbs with 1/2" drywall, 356lbs with 5/8", and 1,000lbs with concrete. These values are taken from the snaptoggle website. More information on these values can be seen at toggler.com. - Smallest drill hole for each bolt sizeâ€"1/4" wing toggle needs 50% larger hole- High strengthâ€"holds up to 2x the load of an old-fashioned wing toggle of same bolt size- Reusable in same holeâ€" remove the bolt without losing the anchor- One-person installationâ€" like having an extra pair of hands behind the wall- Insulation pushed aside by metal channel- Does NOT destroy wall or ceilingâ€"plastic cap & metal channel centers bolt & prevents abrasion Installation Instructions: Drill a 1/2" (Ø13mm) hole. Hold metal channel flat alongside plastic straps and slide channel through hole. Minimum clearance behind wall: 1-7/8" (48mm). Hold ends of straps between thumb and forefinger and pull toward you until channel rests flush behind wall. Slide plastic cap along straps with other hand until flange of cap is flush with wall. Snap straps at wall by pushing side to side, snapping off straps level with flange of cap. Place item over flange. Insert bolt through item and tighten until flush against item, then stop. These instructions are provided by/on the Toggler Snaptoggle website. Package Contents: - 4 (Four) Toggler Snaptoggle BB hallow fasteners