Tictop-3D-Printing-Pen-with-LCD-Screenfor-Doodling-Drawing3D-Printer-Pen-Tool-with-3-Free-175mm-PLA-FilamentMo


Product Parameters:

Extrusion : Hot melt extrusion molding accumulation
Forming: Three-dimensional
Print Range :Indefinite
Spinning speed : Adjustable
Heating temperature in the range :160- 250 degrees Adjustable
Device operating voltage : 12V 3A
Nozzle :0.7 mm
Product packing list:

3D stereoscopic printing pen with LCD screen
12V 3A Power Adapter
3 free filaments 10g each
Instructions for operation:

1.Connect one of the end of the Power Adapter and AC power cord to socket. And connect the other end of the DC plug into the "Power" port on the end of the pen. You can see the yellow LED lights, indicating the device is powered and into servo standby model.
2.Press "Wire Feeding Button"，you can see stunning LED lights, indicating the device has entered the warm-up model, about 0.5-2 minutes later, when the red LED lights turns from red to blue, indicating the end of warm-up, the device is ready for normal operation.
3.Insert the filament into " Wire Loading Hole", meanwhile, you may use your another hand to press "Wire Feeding Button", then supplies will be transported by the built-in motor, the tip end of the nozzle will spit gum,means you load successfully.
4.Your show time,The device is provided with stepless speed control function, in the creative process can be adjusted according to the glue line pen speed, no need to operation with both hands.
Warning:

1.Never touch the nozzle or the heat-generating components while operating.
2.If the device is not used more than five minutes, it will automatically goes to standby model.The "Indicator" show no light. To use it again, you need to press the "Wire Feeding Button".
3.Children should use it under the tutelage of adult.