ThruNite T20/T20S/T20T Uses 1CR123 /1RCR123/ 116340 battery-max output of 255 lumen. (T20(XP-G LED))

Features and Specifications

- Working voltage: 0.9V-5V
- 65g weight (without battery). - Reverse polarity protection design to protect from improper battery installation.
- Tail-switch and twisting head design.
- Stainless steel body with surface treatment drawing process.
- Toughened ultra-clear glass lens with anti-reflective coating.
- OP reflector gives perfect flood.
- Removable clip.
- Stand on tail to serve as a candle, with the wand covered on the head.

Operation

Turn ON/OFF
Press down and release the tail-switch to turn the flashlight on/off .
1.Switch ON: Press the tail cap button down completely until a "click" sound is heard and flashlight turns on.
2.Switch OFF: Press the tail cap button down until a "click" sound is heard and the light is turned off. You also could turn the head loose a bit to turn the light off from on.

Changing Modes
Method1: Half press the tail switch when the light is on to circle through firefly, low and high.
Method 2: When the light is on, loosen the head a bit until the light turns off and tighten it in 2 seconds to change modes.
Method 3: Click the tail switch to change modes (Interval between two clicks should be less than 2 seconds)
Memory function:
Memory function is activated after 2 seconds from the light turned off.Turn on the light after 2 seconds,the mode output keeps the same as your last use.