ThorFire-G1-Color-Changing-LED-Light-Bulb-RGB-E27-6W50W-Touch-Remote-Control-Combo

Bulb Technical Parameters:
Voltage(V): 85-265
Frequency(Hz): 50-60
LED Power(W): RGB 6W
Luminous flux(Lm): 450-500
Color Temperature(K): 2700-3200
Lifespan(h): 50000
PF(cos¦•): 0.65
Current(mA): 35-65
Max diameter(mm): 60
Max Length(mm): 120
Lamp base: E27

How to pair
Install the bulb, as soon as you turn it on, you have 3 seconds to touch "Zone ON" of zone 1 or 2 or 3 or 4 till the bulb blinks. After 3 blinks, the bulb and the remote are paired, you can change colors, dim or choose any modes you want.
How to unpair?
Turn on the bulb, if it¡¯s on, turn if off then turn back on via room switch, you have 3 seconds to touch and hold the ¡°Zone ON¡± till the bulb blinks. After 10 blinks, the bulb is unpaired, and you can only use your switch in room to turn it off/on.
TIPS:
1. There are 4 zones on remote, it pairs and controls 4 bulbs separately.
2. If you want all the bulbs go to white, touch and hold ¡°Master ON¡±, if you want one bulb go to white, touch and hold ¡°Zone on¡± of the zone. Touch ¡°Master OFF¡± to turn off all the RGB lights, touch ¡°remote control ¡± to turn all bulbs back on. Touch ¡°Zone OFF¡± to turn off the bulb individually, and touch ¡°Zone ON¡± to turn it back on. You can also use the switch in your room to turn on/off. This RGB bulb remembers last color or mode when you turn it back on.
3. If you want to play one exact bulb, touch the ¡°Zone ON¡± first, then you can make any changes of the bulb individually.