Tekpower HP9810 Automotive Digital Multimeter

The Tekpower HP9810 is an automotive tester and digital multimeter combined in one, it can measure AC/DC voltage, DC current, resistance, temperature in both celsius and fahrenheit, as well as diode check and continuity test. For automotive testing, you can use it to measure dwell angle and RPM up to 10,000.

Specifications:

DC Voltage: 200 mV, 2V, 20V, 200V, ±(0.5% + 5) 1000V ±(1.5% + 8)
AC Voltage: 200 mV, ±(2.0% + 10) 2V, 20V, 200V at 40 to 400Hz ±(1.5% + 10), 750V at 40 to 200Hz ±(2.5% + 10)
DC Current: 20A ± (2.0% + 10)
Resistance: 200 ohm ±(1.2% + 5) 2K ohm, 20K ohm, 200K ohm, 2M ohm ±(1.2%+5),20M ohm ±(2.5% + 15), 200M ohm ± (5.0% + 30)
Temperature:
(-40 to 1000) degrees C ± (0.75% of reading + 3 digits) < 400 degrees C, ± (1.5% of reading + 15 digits) ‰¥ 400 degrees C
(0 to 1800) degrees F ± (0.75% of reading + 3 digits) < 750 degrees F, ± (1.5% of reading + 15 digits) ‰¥ 750 degrees C
Diode Test
Continuity Test: Audible indication: less than 80 ohms approx.
Tachometer:500 to 10,000 RPM ± (1.5% + 8)
Dwell: 3, 4, 5, 6, and 8 Cylinder ± (1.5% + 8)
Transistor hFE test

Features:

Temperature in Degrees C or F
Manual Range Control
Automatic Negative Polarity Indication
Automatic Zero Adjustment
Data Hold
Back Light
Low Battery Indicator
Over Range "1" Display

What's in the box:

HP9810 Automotive tester
Test leads with alligator clips
Thermo probe
9V battery (installed)
User manual
Plastic carrying bag

Tekpower is a registered trademark in the United States, any unauthorized use of our trademark is a violation of both Federal and State trademark laws and could subject to liability for damages and penalties.