TORK C460M Spring-Wound in-Wall Twist Timer with Commercial Style Metal Plate and 60-Minute Length for Automatic Shutoff of Motors or Lights
This NSi Industries C460M spring-wound timed switch accepts 120/277 VAC input and its DPST output contacts can activate a 20 amp load or 2 hp motor. The timer's twist knob sets time from one minute to 12 hours with an automatic Off. The double-pole single-throw (DPST) contacts are housed within a single-gang in-wall switch with metal cover plate that is suitable for indoor use and is Underwriter Laboratories (UL) Listed and Canadian Standards Association (CSA) certified for quality assurance. This switch is suitable for controlling lighting and fans.
| Switch type | Spring wound timer with twist knob |
| Input power supply | 120/277 VAC, 50/60 Hz |
| Output contacts | DPST contacts, 20 amps load rating, 2 hp motor load rating |
| On/off control | One minute to 12 hours with auto Off |
| Enclosure | Single-gang in-wall, indoor use, metal cover plate |
| Terminal wire size range | #12 AWG (American wire gauge) |
| Operating temperature range | 32 to +122 degrees F (0 to +50 degrees C) |
| Standards met | UL Listed, CSA certified |
Automatic switches are used to turn on or off electrical devices and are activated by time, light, and motion. Time activated switches (also known as timers) operate at preset time intervals during a daily or weekly period and can be either mechanical or electronic. Mechanical timers feature a dial with multiple pins to set the on/off time intervals. Electronic timers feature an LCD display and pushbuttons to set the time intervals. Light activated switches (also known as optical or photo) operate when ambient light levels reach preset values, generally measured in foot candles. Motion-activated switches (also known as motion sensors) operate when an electronic field of a preset range is interrupted. These switches can include energy saving logic that uses combinations of time, light, and motion to operate and can include one or more device outlets or circuit contacts. Automatic switches are used to control indoor lights, outdoor lights, appliances, and small equipment motors.
NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC.
