StanceMagic - 20mm (0.75 inch) Hubcentric Wheel Spacers (4x100, 54.1mm Bore, 12x1.5 Studs) Compatible with Mazda Miata Protege Scion xA xB Toyota MR2 Celica Corolla Echo Prius Tercel Yaris - 2pcs
WARNING: The included lug nuts extend past the face of the spacers. IT IS REQUIRED that the back of your wheels have small cavities (at least 2" width and 1/4" deep) in the mounting pad for installation of these spacers. These cavities are NEEDED so that the lug nuts and wheel studs can sit in this pocket. Verify this before purchasing. Message us for any questions before purchasing the item.
Applications:
1991-1994 Mazda 323
1989-2005 Mazda Miata
1992-1995 Mazda MX-3
1991-1998 Mazda Protege
2004-2007 Scion xA
2004-2007 Scion xB
1986-1991 Toyota Celica (Only fits 4-lug Vehicles)
1988-2002 Toyota Corolla
2000-2005 Toyota Echo
1985-1989 Toyota MR2
2000-2005 Toyota MR2 Spyder
1992-1999 Toyota Paseo
2001-2011 Toyota Prius
1989-2002 Toyota Tercel
2007-2011 Toyota Yaris
IMPORTANT - Must check before purchasing
- SAFETY / INSTALL WARNING: Do NOT install wheel spacer if your wheel studs or lug nuts make contact with the back of your wheels.
- Wheel Stud Length: Your vehicle's wheel studs need to be less than 3/4" (20mm). If not, the back of your wheels need pockets long/wide enough for your studs.
- Fender Gap: Measure your wheel gap for clearance. You will need at least 3/4" (20mm) of fender clearance to prevent the wheel/tire from hitting the fenderliner.
- Fitment: Use the Applications list above. If your vehicle is not on the list, message us so we can help find the correct item.
- No Returns or Exchanges once installed.
Contact Us
Our experienced and knowledgeable staff are here to help with any questions or problems you may have. Simply copy and paste the following link to your browser:
https://www.amazon.com/ss/help/contact/?_encoding=UTF8&ref_=v_sp_contact_seller&sellerID=A23ID4AZTDBV78