StanceMagic - 20mm (0.75 inch) Hubcentric 5x114.3 Wheel Spacers (66.1mm bore, 12x1.25 Studs) Compatible with Nissan Infiniti Vehicles (Check Your Year and Model in Description) - Silver 66.2mm 2pcs

[WARNING] VERIFY BELOW BEFORE PURCHASING
The included lug nuts extend past the face of the spacers. REQUIRED for the back of your wheels have cavities (at least 2" width and 1/4" deep) in the mounting pad. These cavities are NEEDED so the lug nuts and wheel studs can sit in this pocket.

Compatible With:
NISSAN
1995-1998 240sx (Will NOT fit Base Models)
1987-1996 300zx
2003-2019 350z & 370z (Requires removal of Wheel Guide Bolt on Front Rotor for proper install)
2002-2019 Altima
1989-2018 Maxima
2003-2019 Murano
2008-2019 Rogue
2007-2012 Sentra (SE-R and SE-R Spec V ONLY)
2012-2019 Sentra

INFINITI
2003-2014 FX35, FX45, FX50
2003-2009 G35
2008-2014 G37
1996-2005 I30
2002-2005 I35
1992-1997 J30
2003-2011 M45
1990-2008 Q45
2014-2019 Q50, Q60, Q70
2014-2019 QX60
2014-2018 QX70

IMPORTANT - Must check before purchasing
- SAFETY / INSTALL WARNING: Do NOT install wheel spacer if your wheel studs or lug nuts make contact with the back of your wheels.
- Wheel Stud Length: Your vehicle's wheel studs need to be less than 3/4" (20mm). If not, the back of your wheels need pockets long/wide enough for your studs.
- Fender Gap: Measure your wheel gap for clearance. You will need at least 3/4" (20mm) of fender clearance to prevent the wheel/tire from hitting the fenderliner.
- Fitment: Use the Applications list above. If your vehicle is not on the list, message us so we can help find the correct item.
- No Returns or Exchanges once installed.

Have Questions?
Please use the "Customer Questions & Answers" feature in this listing below this section.