StanceMagic - 1.25in Thick Wheel Adapters (Changes Bolt Pattern) Converts 5x4.5 to 5x4.75 (73.1mm Bore, 12x1.5 Studs Nuts) - 5x114.3 to 5x120.7-32mm Silver Spacers - 1.25 inch - 4pcs

WHEEL ADAPTERS (Changes Bolt Pattern) - Vehicle Must Be 5x114.3 or 5x4.5 AND Wheels Must Be 5x120.65 or 5x4.75.

Item Specifications:
Thickness: 1.25" (32mm)
Vehicle Side Bolt Pattern: 5x114.3 or 5x4.5
Wheel Side Bolt Pattern: 5x120.65 or 5x4.75
Centerbore: 73.1mm
Stud/Nut Thread Pitch: 12x1.5
Material: T6 Aerospace Grade Aluminum

Compatible With::
Verify your Vehicle Bolt Pattern and Wheel Bolt Pattern match the specifications listed above. Also check your Vehicle's Centerbore and Stud/Nut Thread Sizing also matches the specifications listed above.

IMPORTANT - Must check before purchasing
- SAFETY / INSTALL WARNING: Do NOT install wheel spacer if your wheel studs or lug nuts make contact with the back of your wheels.
- Wheel Stud Length: Your vehicle's wheel studs need to be less than 1.25" (32mm). If not, the back of your wheels need pockets long/wide enough for your studs.
- Fender Gap: Measure your wheel gap for clearance. You will need at least 1.25" (32mm) of fender clearance to prevent the wheel/tire from hitting the fenderliner.
- If your vehicle hub is smaller than 73.1mm, we recommend purchasing hubcentric rings to reduce the chance of vibrations.
- If your vehicle doesn't come with 12x1.5 threaded studs, additional hardware will be required. Message us for help.
- No Returns or Exchanges once installed.

Have Questions?
Please use the "Customer Questions & Answers" feature in this listing below this section.