StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 4pcs
Wheel Adapters (CHANGES BOLT PATTERN) - Vehicle Must Be 5x100 AND Wheels Must Be 5x114.3 or 5x4.5.
These wheel Adapters are made to be HUBCENTRIC to your vehicle's hub. That means it will fit tight and will prevent vibrations. These Wheel Adapters are also unique in that they are made with a 56.1mm diameter lip. This means that it will be hubcentric to wheels with 56.1mm centerbore.
Item Specifications:
Thickness: 1.0" (25mm)
Vehicle Side Bolt Pattern: 5x100
Wheel Side Bolt Pattern: 5x114.3 or 5x4.5
Centerbore: 56.1mm
Stud/Nut Thread Pitch: 12x1.25
Material: T6 Aerospace Grade Aluminum
Compatible With:
2012-2017 Scion FR-S
Subaru
2012-2019 - BRZ
2002-2007 - Baja
1997-2018 - Forester
1992-2003 - Impreza
2004-2019 - Impreza (Will not fit STI)
1989-2014 - Legacy
2000-2013 - Outback
IMPORTANT - Must check before purchasing
- SAFETY / INSTALL WARNING: Do NOT install wheel spacer if your wheel studs or lug nuts make contact with the back of your wheels.
- Wheel Stud Length: Your vehicle's wheel studs need to be less than 1.0" (25mm). If not, the back of your wheels need pockets long/wide enough for your studs.
- Fender Gap: Measure your wheel gap for clearance. You will need at least 1.0" (25mm) of fender clearance to prevent the wheel/tire from hitting the fenderliner.
- Due to a text limit imposed by Amazon, we are not able to specify everything here. Please See Amazon's "Important Information" section above for additional details/information.
Have Questions?
Please use the "Customer Questions & Answers" feature in this listing below this section.