Sta-Rite P43B0015A4-c Pentek Submersible Motor

Sta-Rite P43B0015A4-C Pentek Submersible Motor PENTEK® XE Series submersible 4" high-thrust motors are built with the latest design, manufacturing and testing technology.  They feature laser-welded 304L Stainless Steel construction, higher thrust capacities, and higher efficiencies.  These motors incorporate "encapsulated, epoxy stator design," and professional grade Class F INSULATION provides longer life in harsh environments.  Each Motor is 100% factory PRESSURE and run tested to SUPPORT our quality standards. KEY FEATURES: Large high-performance 700# Kingsbury thrust BEARING design allow higher thrust loads Designed to provide many years of SERVICE under severe-duty opration Permanent Split CAPACITOR (PSC) insures quiet operation and improved operating efficiency All stainless-steel exterior Professional-grade Class F compliant Motor INSULATION allows for longer SERVICE life Equipped with Surge Arrestor Automatic Thermal Protection Specifications:   3 (Requires a   starter control box)NUMBER OF wireS: HORSE POWER:  1-1/2 VOLTAGE:460 Volt  PHASE:  3 FREQUENCY (Hz):  60 AMP DRAW and SERVICE FACTOR:  (model dependent) See Spec Sheet in Resources for details END BELL:  304 Stainless Steel SHELL:  304 Stainless Steel motorsHAFT:  17-4 Precipitation Hardened Stainless Steel INSULATION:  Class E, 311 degrees F (155 degrees C) MAX. water TEMP.:  86 degrees F (30 degrees C) FASTENERS:  304 Stainless Steel SAND BOOT:  Nitrile CABLE:  48", Field- SERVICEable, Controlled Compression Design, UL and CSA Approved DIAPHRAGM:  EPDM THRUST bearings:  Kingbury-type, Pivot Shoe, Carbon Graphite Mating Ring THRUST LOAD CAPACITY:  700 lbs /* */