Smooth-On Free Form AIR Lightweight Epoxy Putty - Trial Unit

*NOTE* The great thing abou this prouduct is that you can have a great looking smooth mold that is light weight and you can sculpt the flange right in. Thats right, this Putty is sculptable! I love this stuff personally. Free Form AIR is an extremely lightweight epoxy putty suitable for an infinite variety of industrial and art-related applications. This is a low-odor, low shrinkage putty that is unique, inexpensive and easy to use. Free Form AIR is mixed by hand with a 1A:1B by volume mix ratio. It offers a long working time and cures overnight at room temperature to a hard, rigid epoxy that is very strong with modeling board-like properties. Cured Free Form AIR is so lightweight, it will float in water. It can be sanded, shaped, drilled, tapped and CNC machined/routered. It will readily accept any paint. Free Form can also be color pigmented with SO-Strong or Ignite colorants. After mixing, Free Form AIR can be pressed into a mold to make a lightweight, detailed casting. It will hold vertical surfaces and can be applied to almost any surface including polystyrene foam for rough sculpting. Free Form putty can also be used to make rigid support shells or mother molds. Used as a lightweight adhesive, Free Form AIR will bond to itself and a variety of surfaces including wood, stone and EpoxAcoat Red surface coat epoxy. Free Form Air will even cure under water. Pot Life/Working Time; this material is mass sensitive. The more material you mix at one time, the less time you have to work with it. Working tip; If mixing a large quantity, flatten putty with a rolling pin to reduce mass concentration and extend pot life. Thickness; 1.5 inch (3.81 cm) - pot life is 30 minutes, handling time is 2.5 hours, full cure in 24 hours. Thickness; 3/8" (0.95 cm) - pot life is 60 minutes, handling time is 4 hours, full cure in 24 hours. Thickness; 1/8" (0.32 cm) - pot life is 120 minutes; handling time is 8 hours, full cure in 24 hours.