Skiliwah 1mm*50 Meters 9080 Hi-Temp Double Sided Tape Adhesive for LED LCD Panel Strip

Product Description

Made of non-woven cloth and coating with acrylic on both sides, half transparant color, very easy to operate, good Durability, temperature withstanding, strong adhesive, waterproof.
RoHS Product Certification
Usage: normally used for case, pannel, lcd, led, etc. adhesive.

Application Techniques

Bond strength is dependent upon the amount of adhesiveto- surface contact developed. Firm application pressure develops better adhesive contact & thus improves bond strength.
To obtain optimum adhesion, the bonding surfaces must be clean dry and well unified. A typical surface cleaning solvent is isopropyl alcohol & water. Use proper safety precautions for handling solvents.
Ideal tape application temperature range is 21¡£C to 38¡£C (70¡£F to 100¡£F).
Initial tape application to surfaces at temperatures below 10¡£C(50¡£F) is not recommended because the adhesive becomes too firm to adhere readily. However once properly applied low temperature holding is generally satisfactory.

Tips

Pleas be sure the surface is clean before adhesive,
Best adhesive temperature is 21~38C.
Picture is for your reference, acutal width is as per acutal tape. Thanks!

Package Contents

1x 3M 9080 Hi-Temp Double Sided Tape