Shell Sorter Value Pack for Sorting Mixed Brass by Caliber
The Shell Sorter is a simple product designed to reduce the time spent sorting brass by caliber, allowing you to enjoy more time reloading and shooting. The Sorter simply sits on top of a common 5 gallon bucket, with a few shakes your brass is sorted by caliber. The Shell Sorters is comprised of three pans designed to sort several common calibers. The three main calibers that most reloaders sort are 45 ACP, 40 S&W, and 9mm. We have labeled the sorters according to those three main calibers. The sorters do sort many more calibers! The fastest way to sort is to stack all three of the pans together with the yellow pan on top, and the black on the bottom, in that way all your brass is sorted at the same time. If you sort before tumbling as is recommended, most shells that are inside of each other will come apart with the shaking and are sorted correctly. However, if you tumble first, those are likely to jam together with small bits of media, and sometimes those require a pliers. The sorters can also take the place of your media sifter. Just tumble, pour your brass into the appropriate sorter(s), shake a bit, your media is in the bucket, and your brass is ready for the next step. You can use this on the range so that you only bring home brass in the calibers that you reload. We sell quite a few Shell Sorters to members of IDPA and USPSA. If you reload quite a bit like they do, you need a Shell Sorter! The Shell Sorter is made of ABS, a very strong plastic which will give a lifetime of service. We placed a sorter underneath a car tire, and it didn't break or distort! In fact, it still worked! Always wear gloves and a dust mask when working with used brass because of the levels of lead dust present. The 380 Shell Sorter Plate is not quite as fast to use as the Shell Sorters, but is just as effective. The 380's will fall through the plate and remain in the black pan. To retrieve the 380's, remove the plate and dump them out.