Shanhai RepRap Teensylu V0 8 Printer Driver Board on Chip USB Sanguinololu Based Prusa



Know more on Wiki Discuss on Froum About Us
Reprap Teensylu v0.8, printer driver board,on-chip USB,Sanguinololu based,Prusa
Items Description
This is a project that is based on Sanguinololu. The ATmega644P has been replaced with an Atmel AT90USB1286 MCU. This Microcontroller has on-chip USB, removing the need for the FTDI USB UART. LUFA CDC bootloader preinstalled on the AT90USB1286 allows you to upload the firmware through USB cable directly. All of the through hole resistors and capacitors have been replaced with 0805 SMT components. Like the Sanguinololu the Teensylu has expansion headers supporting I2C, SPI, UART, and ADC pins. All extra I/O ports of the AT90USB have been broken out to headers for prototyping.
Features

Size:100mm x 60mm
Teensylu clone, Atmel's AT90USB1286
LUFA CDC bootloader preinstalled on the AT90USB1286 allows you to upload the firmware through USB cable.
Up to 4 A4988/4983 stepstick or Pololu stepper driver boards on-board (X,Y,Z,Extruder)
Supports multiple power configurations (Carried from Sanguinololu)
2 thermistor connectors with circuitry
2 N-MOSFETs for extruder/bed heaters
1 N-MOSFET for low power fan or motor
Selectable 12v/5v endstop voltage
14 Extra pins available for expansion and development - 6 analog and 8 digital (Fully compatabile with Sanguinololu), with the following capabilities
Additional 14 pin header with 11 I/O for prototyping
SMT Components sized at 0805 for easier soldering.
Package list
1 x assembled Teensylu