Security Mini IP Camera, UOKOO 1280x720p Home Surveillance Camera Wireless IP Camera With Built In Microphone WiFi Security Camera, Motion Detection Black

Here are the steps to connect with wifi. 1. Power the camera up with the included power adapter. When you see the camera blue LED blinks slowly, it means it gets powered on and wait for pairing. ( LED for the power cord is in solid Red.) 2. Download and Install APP iSmartViewPro 3. Open the APP iSmartViewPro and do the One Key Wi-Fi Configuration by Sonic Wave. below few steps on one key wifi configuration a. You need a smart phone with wifi connected. b. Open the iSamarViewPro App, click "More" at the bottom c. Go to "One Key WiFi" to fill in your Wi-Fi password d. Click "Configure" at the right top corner, you will hear beep Put the smart phone nearby the camera (within 1 meter) when doing the configuration. You will hear asequence of beeps which means the connection is going on via sonic wave. e. After two beepings please wait for around 10~15 seconds, until the blue LED becomes quick blink, and then in Solid Blue. This means it has been configured. PS: If you cannot see the blue LED becomes solid, please repeat the configure button untill it is in solid blue. This is very important, the LED must in Solid otherwise you cannot monitor the camera. f. After successfully configurate, the bluelight will flash faster and then become ON always. Otherwise please repeat the above steps to re-configure it. 4. Click Back---Camera----Add camera. 5. Scan the QR Code at the back side of the camera, input password 123456 6. Click Done 7. Now you can monitor the camera which will shows Online. Please make sure the wifi is not 5G, and there is no special character on the wifi name and password. Please make sure there is a blinking blue light before you do the one-key wifi configuration. If there is no blue light, please make sure your adapter is plugging into the jack of the camera.