Seco-Larm E-931CS22RFCQ Wireless Weatherproof Entry Alert System For Monitoring a Driveway or Use as an Entrance Indicator, Up to 22 Feet Sensing Range, Up to 328 Feet Wireless Transmission Range
The ENFORCER Wireless Entry Alert System is a self-contained esy-to-install alert system for commercial or home applications. Each set contains a reflective photoelectric beam sensor that, when tripped, communicates wirelessly with a speaker installed up to 328 feet away
Key Features - Ideal for monitoring a driveway or use as an entrance indicator
- No wiring required between the sensor and speaker; when tripped, the sensor wirelessly transmits to any programmed speaker
- Weatherproof IR photoelectric beam sensor for outdoor use
- Speaker makes "ding-dong" or siren sound if beam is interrupted
- Speaker volume can be adjusted or turned off
- When in siren mode, alarm time is adjustable from 3 to 30 seconds
- Additional speakers can be connected to the sensor wirelessly (only one speaker included)
- Kit includes weatherproof wireless reflective sensor (Tx), wireless speaker (Rx), reflector, two power adapters and three mounting brackets (one each for the sensor, reflector, and speaker)
Specifications - 433.92 MHz Operating frequency
- Sensor and Speaker operate at 12VDC (adapter included)
- Sensing range up to 22 feet(7m)
- Wireless transmission range up to 328 feet (100m)
- Sensor dimensions 3-1/4" x 2-9/16" x 1-1/2"
- Speaker dimensions 3-1/4" x 2-15/16" x 1-9/16"
- Reflector dimensions 2-3/8" x 2-1/16" x 3/8"
- Sensor draws 20mA when active
- Sensor standby mode draws 5mA
- Speaker draws 100mA when active, 25mA in standby mode
- IR LED Light source
- 0 to 90 dB Speaker volume
- Alarm Time Range from 3to 30 seconds (Adjustable)
- Chime, off and alarm sound (selectable)
- Operating temperature ranges from 32 degrees Farenheit to 122 degrees Farenheit
