Seamax Portable 12V Two Stage, 1 to 10 PSI Electric Air Pump with 7AH Battery for Inflatable Boats

Supported Air Valves - This pump is suitable for the products that are using the HR (Halkey-Roberts), Bravo or similar type air valve. This kind of air valve has a turning pin at the middle to control the valve's Open & Closed position. There are universal valve adapters supplied with the pump to fit it. We have the Pump in Kite version, Please know the Kite version pump also good for Inflatable boats and all application same as the regular pump version.

About this pump - Turn on the POWER switch and enter the maximum desired pressure by using the Set Pressure buttons, the set pressure will be shown on the right hand side of LCD screen. (10KPa = 100mbr = 1.45 PSI). Factory default working pressure is set as 25KPa (3.6 PSI).This pressure is suitable for most inflatable boats.

Use for Deflation - You can use it to deflate the same chamber too. Attach the yellow hose onto the deflation side of the inflator (round outlet with notches). Attach the other end to the chamber you wish to deflate.

Battery Built In - 80DB model has a built-in battery and travel charger. The type of this battery is 12V gel battery, lead acid type, battery capacity 7AH to support max 45 minutes working time. The battery will have 500 Cycles & over 8 years life time if you can follow this maintenance manual. The charger is 110/240V travel type with double charging procedures. When you plug in the charge and connect with the pump, a red light showing on the charger can indicate the battery charging. The max charging current is 1A from the charger.

Warranty - For recreational using, the electrical control boards, motor, charger are guaranteed for 2 years. Battery, air hose, valve adapters and carrying bag are guaranteed for 6 months. Warranty for commercial use is limited to six months from purchase date, and 90 days warranty for battery