SainSmart UNO Board ATmega328P with USB Cable Compatible With Arduino

The SainSmart UNO is a microcontroller board based on the ATmega328 (Datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The UNO differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter. Revision 2 of the Uno board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.

"UNO" means one in Italian and is named to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform; for a comparison with previous versions, see the index of Arduino boards.

Sepecification:
*Microcontroller:ATmega328
*Operating Voltage:5V
*Input Voltage (recommended):7-12V
*Input Voltage (limits):6-20V
*Digital I/O Pins:14 (of which 6 provide PWM output)
*Analog Input Pins :6
*DC Current per I/O Pin:40 mA
*DC Current for 3.3V Pin:50 mA
*Flash Memory:32 KB (ATmega328) of which 0.5 KB used by bootloader
*SRAM:2 KB (ATmega328)
*EEPROM :1 KB (ATmega328)
*Clock Speed :16?MHz

Documents:
EAGLE files: arduino-uno-reference-design.zip
Schematic: arduino-uno-schematic.pdf

Package list:
1x SainSmart UNO
1x USB Cable