SainSmart TFT LCD Screen Kit for Arduino Due UNO R3 Mega2560 R3 Raspberry Pi (With Mega Shield + Mega2560 R3, 2.8")

2.4/2.8" TFT LCD Display is a LCD touch screen module. It has 40pins interface and SD card and Flash reader design..The Screen include a controller ILI9325, it's a support 16bit data interface , easy to drive by many MCU like arduino families，STM32 ,AVR and 8051. It is designed with a touch controller in it . The touch IC is XPT2046 , and touch interface is included in the 40 pins breakout. It is the version of product only with touch screen and touch controller.

TFT LCD Extend shield can help you out of the bothers to use other cables. You just need to plug the module to arduino mega2560/Mega2560 R3/DUE through this shield.

Mega 2560 is a microcontroller board based on the ATmega2560. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Duemilanove or Diecimila.

MEGA2560 R3 uses an ATMega16U2 instead of the ATMega8U2 chip, which allows for faster transfer rates and more memory. No drivers needed for Linux or Mac, and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. Also adds SDA and SCL pins next to the AREF.

Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.
　

Note: Please download codes here:
* for 2.8"
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-011-976/2.8+TFT.zip 
* for 2.4"
https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-011-977/2.4+TFT.zip