Roll-N-Cut Dispenser With One Flexible Magnet Tape Roll, 1/16" Thick, 1/2" Wide, 15' Length, Pack of 1, 07519

Perfect for making flat lightweight items magnetic. For best results: 1)Allow magnet to reach 60 degrees Fahrenheit or 15.56 degrees Celsius. 2)Roll out magnet from dispenser to desired length and cut by the press of its lever all in a one-handed operation. 3)Magnet requires direct and full contact with steel for maximum hold, therefore it is best to make sure that magnet is flat by applying magnet's dark gray side to large metal surface for several hours to flatten curl. Do not roll magnet strip in opposite direction to remove curl. 4)If applicable surface for adhesive is made of stainless steel, painted steel, aluminum, glass, rigid plastics or similar surface, clean it with isopropyl alcohol and allow to dry. 5)Peel back liner from adhesive and apply adhesive to surface with firm and even pressure 6)Allow adhesive to cure for a minimum of 24 hours or 72 hours to reach maximum bond with surface. Magnet withstands temperatures from 0 - 150 degrees Fahrenheit. Refills available by searching on "Roll-N-Cut Flexible Magnet Tape Refill - 1/16" thick x 1/2" wide x 15 feet.