RioRand Bluetooth 4.0 BLE Low Energy/Power RF SOC Transceiver Smart Hardware Serial Module 2.4GHz Bridge/Direct-driven Mode - CC2540 iBeacon - 2414mm - For Apple/Android

FEATURE:
1,Bluetooth 4.0 single mode Compliant ISM 2.4GHz module.
2,Utilizes the TI CC2540 SoC with 256K Flash, 8K RAM.
3,Supports master and slave modes
4,Integrated Bluetooth low energy stack including ATT,GATT, SMP, L2CAP, GAP
5,Over 70 meter (230 ft) line of site (LOS) distance with integrated antenna.
6,Can be externally controlled via simple ASCII AT commands over the UART or 7,programmed with custom
applications embedded in the module.
8,RSSI monitoring for proximity applications
9,10-bit ADC
10,Serial Interface (UART / SPI)
11,Wake-up interrupt,Watchdog Timer
12,AES Security Coprocessor
13,BQB-EPL, FCC, RoHS, and Bluetooth

Operating Conditions Summary:
Supply voltage :2.0 - 3.6V
VDD ripple :100 mV Max
Max voltage on any pin:VDD + 3 V (Not 5V Tolerant)
Supply Temperature Range :-20 - +60 °C
Ambient Temperature Range :-40 - +85 °C

Current Consumption Summary:(Measurements done at TA = 25°C, VDD = 3 V)
Power Mode 3 (External Interrupts):0.4uA
Power Mode 2 (SleepTimerOn):0.9uA
RX Standard Gain:19.6mA:19.6mA
TX -6 dBm:24mA
TX 0 dBm: -
RF Specifications Summary:
Frequency:2402 - 2483.5 MHz in 20 Khz steps
Data Rate and Modulation :1 Mbps, GFSK
Number of Channels : 40: 37 data / 3 advertising (0,12,39)
Output Power:-23 to 4 dBm
Receive Sensitivity (w/chip antenna):-93dBm/-87dBm
The document can be downloaded here:
https://app.box.com/s/2wm3tklv4fdmwrc0bkiu
Package Include: 1x RioRand Bluetooth 4.0 BLE Module