Riland Cut40, 40amp Plasma Cutter 220VAC
This is a very compact inverter plasma cutter capable of outperforming it's competition. ie: HTP, Miller, Hobart, Thermal Dynamics, Blue Point, Lincoln & Hypertherm. Using this light weight plasma cutter is cheaper than Oxyacetytlene after just a few cuts. Less cleaning, less maintenance, less noxious gases, less fire hazard, simply less overall work and a better, faster, cleaner cut. Consumables and parts included: 5x reversible electrodes 5x cutting tips, 2x swirl ring, 2x shield cup. Torch has 1ea of the above already installed. You also get an air regulator w/ built in particle filter and drain plug with hose and connectors. Cutting Specs: 3" Per minute @ 3/4" Steel (Severance Cut), 7" Per minute @ 1/2" Thick Steel, 17" Per minute @ 3/8" Thick Steel High Voltage DC Plasma cuts thicker materials than standard DC plasma cutters. This 40amp Inverter Plasma cutter cuts like a 60amp standard DC plasma cutter! Power Factor 0.93, 100% Duty cycle (cut time) at 31amp cut, 60% Duty cycle at 40amp cut setting Air requirements: 50-75psi @ 3.5cfm Internal High Speed cooling fan for long life, Has built in Thermal & Overload Protection 8ft power cord, 16ft torch cord, 10ft ground cord