Rhino Large View Auto Darkening Welding Helmet (Flames)

Featuring an AUTO-DARKENING LARGE VIEW LENS. The viewing area on this Rhino Welding Helmet is more than 10 square inches, 4" x 2.6". In comparison, standard view lenses are about half that size, providing 5 square inches on average. Large View lenses allow DOUBLE THE WELDING VISION. Double your vision with a Large View Rhino Welding Helmet. Continuous ultraviolet and infrared protection is provided by the nylon shell. Both lightweight and flexible, this design is ideal for reduced fatigue and increased durability. Many helmets sold today are made from heavier materials resulting in designs that are more rigid. The heavier weight can lead to accelerated fatigue and other problems especially when the helmet is worn for longer periods of time. In addition, rigid designs are much more prone to crack or shatter during an accidental impact. Light/Dark States - Shade 4 / Shades 9-13 (No Grind Mode) Reaction Time - 1/25,000 second Low Battery Indicator - Signals for the replacement of both batteries Power Sources - Solar panel and two replaceable lithium CR2025 batteries Arc Sensors - Two, Independent and Redundant Headgear - Ratchet style with headband Weight - Slightly less than 1.2 pounds including headgear Safety - Conforms to ANSI Z87.1 / CE / CSA / AS/NZS / EN379 / ISO9001-2008 Lens Covers - Interior and Exterior lens covers come installed. Delay - Time interval for the lens to remain dark after welding has ceased - adjustable between 0.15 - 0.80 seconds Sensitivity - Changes the amount of light/arc required to darken the lens. Extremely useful for adapting to variable light conditions and a wide range of welding processes. Please Note: This helmet is not suitable for "overhead" welding applications, laser welding, or laser cutting applications.