RepRap Champion Metal J-Head V5 Hot End for RepRap 3D Printer 1.75mm Filament Bowden Extruder 0.4mm Nozzle

Hotend is equipped with NTC3950 thermistors, 12V 40W heater and 12V Fan

This V5 Hotend has all metal stainless heat break which is good if you want to print higher melting point plastics, like polycarbonate.

NTC 3950 Thermistor parameters:

Use temperature sensor number 11 in Marlin firmware
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Package contents:

1 x Metal J-Head V5 hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / 12V fan / NTC3950 Thermistor
1 x One meter long bowden PTFE/teflon tubing 4mm OD 2mm ID
1 x Pneumatic Straight Fitting to connect to extruder cold end.