Reflective Concepts Carbon Fiber Vinyl Wrap Sheet - Cut Your Own Overlay

Vinyl wrap decal that is sized at 1.6" tall x 2.7" wide and made from Automotive Wrap. Trim it yourself to cover the gold section of the steering wheel emblem.

Installation:

Step 1: Align and press the decal firmly into place.
Step 2: Use a heat gun to heat shrink the wrap to the surface.
Step 3: Use your finger nail to make an indent around the edge of the gold so you can see where to trim out.
Step 4: Use a SHARP knife to trim out the shape. Trim slowly and press firmly to ensure this cuts all the way through.
Step 5: Peel off the excess material. Apply more heat and press firmly onto the decal.
Note: It is very difficult to get an exact trim around this decal, so take your time. We are not responsible for the cuts that are made in the material. Do not skip the heat. The decal will not adhere properly if this step is not completed!