Rain Lamp Oil - 32 Ounce - Unscented

This rain lamp oil is the recommended replacement Drakeol #35 that most vintage rain lamps or drip lamps call for. The one quart size should adequately fill most rain lamp however some may require more. Below are general refill instructions. Instructions For Adding Oil 1. Place plastic sheeting under your work area and cover it with newspaper. Keep paper towels handy in case of spills and drips. 2. Turn on the rain lamp. 3. Use a paper towel to gently wipe oil from the fishing strands where you will be working. Locate the holes in the bottom pan of the cage under the foliage and statue. There is not a specific oil fill hole. The oil will find its way through the same holes that collects oil drips from the fishing line strands. The collection basin is under the cage where the oil collects and is pumped to the top of the lamp. 4. Slowly pour the first pint of oil into the bottom of the cage under the foliage. 5. Wait five minutes for the rain effect to start and listen for a change in the sound of the pump. 6. Add another half pint of oil if the rain has not started or there is no change in the sound of the pump. 7. Wait five minutes and repeat pouring a half pint of oil at a time until the rain looks normal and the pump sounds somewhat muted. 8. Expect to pour at least one pint of oil but no more than three pints. Stop adding oil when the raining effect looks normal. Do not use too much oil, because it can overwhelm the pump.