R-Series R235LS Amplifier

The Russound R235LS is a 2-channel power amplifier with automatic local source switching capability. The R235LS allows a local source (e.g., PC or TV in the bedroom) to automatically override the speakers in that particular zone of a distributed audio system. This can be accomplished with a variety of input/trigger options for versatility in many different applications. The R235LS is rated at 35 watts per channel into 8 ohms and 50 watts per channel into 4 ohms. With the Stereo/Bridge Mono switch in the Bridge Mono position, both amplifier channels are combined for a higher powered mono output. In bridged mode the R235LS is rated at 100 watts of power into a single 8-ohm load. Each amplifier output channel incorporates robust protection circuitry for safety and reliability under extreme circumstances. Stereo Continuous Output Power: 35W per channel at 8 ohms. 50W per channel at 4 ohms Bridged Output Power: 100W at 8 ohms, 2 channels bridged THD+N: 0.05% from 20Hz to 20kHz Signal-to-Noise Ratio: >100dB A-weighted Frequency Response: 20Hz to 20KHz +/- 0.3dB Input Sensitivity: 70mV for 1W at 8 ohms 420mV for 35W at 8 ohms Input Impedance: 47kohms Line Input Voltage Gain: 32dB Delay Time: 5 seconds to 5 minutes Input Trigger: 12VDC 10kohms Output Trigger: 12VDC 100mA max