RFSPACE NetSDR+ -01-DC High Performance SDR w/ 10 MHz REF IN and NEW 0.09-550 MHz coverage w/ 8 MHz Spectrum Display + REFLOCK

The NetSDR+ radio is a high performance networked SDR with 1.6 MHz bandwidth. The NetSDR uses a high performance 80 MHz, 16 bit ADC with both dithering and randomization for best performance. The output I/Q bandwidth is configurable via software. PC communications are handled over a 100 base-T port using 24 or 16 bit I/Q words. The unit is compatible with the SpectraVue and SDR-Radio software that will have you up and running in minutes. The software includes analog and digital mode demodulation and I/Q capture of spectrum at up to a 1.60MHz BW. The SDR-Radio software allows the use of the NetSDR over the internet. The full 1.6 MHz waterfall and demodulation audio can be transported via a 5 KB/s link. For those interested in writing their own applications, RFSPACE supplies a fully documented protocol for communicating with the hardware. There is no need to calculate the downconverter DSP parameters. The NetSDR just needs the center frequency, attenuator and preselector filter settings, output sample rate and mode to begin streaming data. Other solutions require complicated USB interfacing that is platform specific. The NetSDR utilizes straight TCP/IP and ethernet for all communications. This offers the highest possible performance due to the highly optimized ethernet drivers on PC, Mac and Linux systems.