RF AC 100-240V 2500W One Transmitter with 4X 1 Channel Relays Smart Wireless Remote Control Switch White Color Transmitter

Specifications:

Transmitter
Battery Type: 12V 23A(not included)
Remote Distance: 100m (Theoretical value)
Receiver
Input Voltage: AC 36-260V
Operating Frequency: 433MHZ/315MHZ
Operation Way: Inching, Self-locking
Coding Way: Intelligent Learning
Output Type: Active output
Maximum load: 2500W
Factory Default: Self-locking
Board Dimension: 69x49x17mm
Case Dimension: 75x65x29mm

Operation Way and Steps:
Inching mode: The output relay remains on as long as the transmitter button is depressed.
Self-Locking mode: Press the button one time, the relay turns on; Press again, turns off.

Programming the control:
Note: The working mode has been set already before shipped out, you don¡¯t need to change. Please remember to cut off the power before making any change.
To change the mode, you should clear the memorized code first. Press the button on the receiver for several seconds, the light will turns on, then off, at last turns on.
For inching mode, leave the three points empty.
For Self-Lock mode, insert the jumper into the position "1" and "2"

How to Link
Whenever the receiver mode is changed, the transmitter must be learned by (linked to) the receiver. Press the button on the receiver until the red light on the receiver turns off, release the button. Then press the button on the transmitter, the light on the receiver will turn off after flashing several times.

Package Includes:
1X Transmitter (Battery is not included)
4X Receivers