QuestCraft 17PC Universal Clutch Alignment Tool Kit Mechanics Car Clutch Aligning Align CP138068

1 x 150mm Long Alignment Tool Shaft 8 x Pilot Bearing Adaptors: 15.5 x 14.2 x 26.6mm 16.7 x 15.4 x 27.0mm 19.0 x 17.5 x 27.5mm 20.0 x 18.6 x 27.5mm 21.4 x 20.0 x 27.4mm 23.0 x 21.6 x 27.5mm 23.5 x 22.0 x 27.5mm 26.6 x 24.2 x 27.5mm 8 x Clutch Plate Adaptors: 12.6 x 10.8 x 19.2mm 14.8 x 12.2 x 19.4mm 15.0 x 13.0 x 19.3mm 16.0 x 14.7 x 19.7mm 17.7 x 15.8 x 19.4mm 19.0 x 17.1 x 19.3mm 20.0 x 18.3 x 19.1mm 21.6 x 20.0 x 19.1mm Instruction: •1. Select the appropriate guide sleeve for the internal diameter of clutch plate and slide it onto the alignment adaptor bar. Ensure the taper of the guide sleeve runs towards the threaded end of the adaptor bar. •2. Select the appropriate centring sleeve for the spigot bearing and screw it onto the end of the alignment adaptor bar. •3. Slide the clutch plate onto the guide sleeve, ensuring the correct orientation. •4 Fit the centring sleeve into the spigot bearing and slide the clutch plate, on the guide sleeve, up to the flywheel. •5. Fit the clutch pressure plate and cover assembly and bolt in place. •6. Remove the alignment tool.