Pyle 2-Channel Audio Mixer - DJ Sound Controller Interface with USB Soundcard for PC Recording, XLR and 3.5mm Microphone Jack, 18V Power, RCA Input and Output for Professional and Beginners - PAD10MXU

PylePro Model : PAD10MXU

2-Ch. Mixer With USB Audio Interface

2 Channel Mini Mixer With USB Audio Interface

• Combo Input Connector Female/XLR And '' Phone Jack For MIC/Line Inputs.
• Line 3/2 Stereo Line Inputs RCA Plugs,To Connect Cd, Mp3 Tape Deck, Players.
• Main Out RCA Plugs To Connect The Mixer, Receiver Or Amplifier.
• Signal Output Thru The Headphones
• Line/INSTR SW Input Select Switch Set
• Line 2/3 Level This Control Adjusts The Volume Of Signal Input Of Line 2/3.
• Peak Led It Lights Up Went The Input Signal Of Ch1 Is Too High.
• Ch 1 Gain This Control Adjust The Volume Of Signal Input Of Ch1.
• Phantom Power: 18V
• Phantom Power Supply On The XLR Connector Of Ch1.
• Phantom Led Indicates That Phantom Power Is On.
• USB Audio Interface
• Master Lets You Control Mixer's Overall Volume Level
• Clip Led Lights Up Went The Main Output Signal Is Too High
• Monitor To Control Volume Output Of The Monitor Jack.
• Power Led Indicates That The Unit Is In On Position.
• Dimensions: 4.7'' x 3.8'' x 1.3'' -inches
• 
  

• Combo Input Connector Female/XLR And '' Phone Jack For MIC/Line Inputs.
• Line 3/2 Stereo Line Inputs RCA Plugs,To Connect Cd, Mp3 Tape Deck, Players.
• Main Out RCA Plugs To Connect The Mixer, Receiver Or Amplifier.
• Signal Output Thru The Headphones
• Line/INSTR SW Input Select Switch Set
• Line 2/3 Level This Control Adjusts The Volume Of Signal Input Of Line 2/3.
• Peak Led It Lights Up Went The Input Signal Of Ch1 Is Too High.
• Ch 1 Gain This Control Adjust The Volume Of Signal Input Of Ch1.
• Phantom Power Supply On The XLR Connector Of Ch1.
• Phantom Led Indicates That Phantom Power Is On.
• USB Audio Interface
• Master Lets You Control Mixer's Overall Volume Level
• Clip Led Lights Up Went The Main Output Signal Is Too High
• Monitor To Control Volume Output Of The Monitor Jack.
• Power Led Indicates That The Unit Is In On Position.